H‹Æ—pƒ~ƒVƒ“‚ðŠÜ‚Þ–D»‹@Ší‚Ì—Ao“üê–古ŽÐ@‘åãŽs@ƒGƒŠƒ[Š”Ž®‰ïŽÐ
ƒz[ƒ€ ‰ïŽÐ—”O ‰ïŽÐ‰ˆŠv ‰ïŽÐŠT—v ƒŠƒ“ƒN ‚¨–â‚¢‡‚킹 ENGLISH ’†•¶

Žæˆµ»•iˆê——
MITSUBISHI BRAND

ŸŽO•Hƒuƒ‰ƒ“ƒh

CHANGES FOR THE BETTER MITSUBISHI INDUSTRIAL SEWING MACHINE AC SERVO

LIMISERVO X G SERIES

NEW MITSUBISHI LIMISERVO G SERIES!





  1. COMPACT, LIGHTWEIGHT MOTOR WITH COMPLETE RANGE OF CONVENIENT FUNCTIONS!





  1. REALIZATION OF COMPACT, LIGHTWEIGHT MOTOR
    MOTOR SIZE REDUCED BY APPROXIMATELY 60% WHEN COMPARED WITH PREVIOUS MOTOR(XL-554). MOTOR WEIGHT REDUCED BY APPROXIMATELY 1.7KG.



  1. STEP SEQUENCE FUNCTION

    THIS FUNCTION ENABLES EASY PROGRAMMING OF THE DESIRED INPUT, OUTPUT AND MACHINING OPERATIONS IN SEQUENCE WITH THE STITCHING PROCESS. (EXTENSIVE UPGRADE OF EXISTING MACHINE SIMPLE SEQUENCE MODE)

    VARIOUS OPERATIONS CAN NOW BE INCORPORATED INTO THE gSTITCHING PROCESSh, INCLUDING THOSE PERFORMED BEFORE AND AFTER OPERATION.

  2. DIRECT PARAMETER NO. CALL-UP FUNCTION

    PREVIOUSLY IT WAS NECESSARY TO SELECT THE RESPECTIVE MODE TO PERFORM SETTINGS WHEN MAKING CHANGES TO THE PARAMETERS, HOWEVER, BY USING THE G10 OR G500 CONTROL PANEL, IT IS NOW POSSIBLE TO CALL UP THE REQUIRED PARAMETER IN A SINGLE OPERATION. IT IS ALSO POSSIBLE TO CALL UP PARAMETERS FOR EACH MODE.





  1. COMPUTER INTERFACE STANDARD EQUIPMENT

    SETTINGS DATA CONTROL INCLUDING BATCH WRITING, READING AND SAVING OF SETTINGS CAN BE PERFORMED USING THE SETUP SOFTWARE. (XCG_SET)

    STEP SEQUENCE CREATION, EDITING, ETC. CAN BE PERFORMED USING THE DEDICATED STEP SEQUENCE SOFTWARE. (XCG_STEP)



  1. FULL FUNCTIONALITY

    THE G SERIES RETAINS ALL THE OPERABILITY AND MULTI-FUNCTIONALITY OF THE XC-F SERIES! THE CONTROL BOX USES THE SAME CONNECTORS AS THE XC-F SERIES, ENABLING EASY CONNECTION.

    THE SETTINGS DATA SAVE FUNCTION HAS BEEN EXPANDED TO ENABLE SAVING OF SETTINGS DATA FROM 1 MODEL TO 2 MODELS.

    A PARAMETER CHANGE DIFFERENCE DISPLAY HAS BEEN ADDED. (A FLASHING DOT(.) DISPLAYS AT THE CHANGED PARAMETER.)

    2 TYPES OF FUNCTION SETTING CAN NOW BE PERFORMED WITH A SINGLE INPUT.

  2. INTERCHANGEABILITY

    THE XC-KE-01P DETECTOR, XC-FM-2, SC-FM-3 (LS2-1380 ONLY), AND LE-FA PRESSER FOOT LIFTER UNITS, AND XC-CVS-2 VARIABLE SPEED PEDAL CAN ALL BE USED AS IS. THE XL-554 MOTOR CAN BE USED WITH AN OPTIONAL ATTACHMENT BRACKET.
  3. CONTROL PANEL

    XC-G10 AND XC-G500 SERIES CONTROL PANELS ARE AVAILABLE. THE EXISTING OPERATION PANEL CAN BE ATTACHED TO AND REMOVED FROM THE XC-G10 SERIES CONTROL PANEL. SIGNIFICANT ENHANCEMENTS HAVE BEEN MADE TO THE OPERABILITY OF THE XC-G500 SERIES CONTROL PANEL OVER EXISTING FUNCTIONALITY (XC-E500), AND THE SETTINGS DATA MEMORY HAS BEEN DOUBLED.


  1. Control panel XC-G10S(control box attachment type)(Impossible to use it together)
    XC-G10L(Impossible to use it together)
    XC-G500-Y (Impossible to use it together)
    Auto presser foot
    lifter unit
    XC-FM-2:Electromagnetic type (24V)
    XC-FM-3:LS2-1380 only
    LE-FA:Air type (Shared30V/24Vuse)
    Variable speed pedal XC-CVS-2:3-speed pedal,standing machine
    Lever unit
    (separated type)
    XC-GL-1-SET:1-step kick-back use(installation plate,extension cable set) (separated type)
    XC-GL-1-SET:2-step kick-back use(installation plate,extension cable set)
    Extension cables 1.0m motor cable (200V):K14M52158002
    0.6m detector cable:K14M717324830
    1.0m encorder cable:K14M71725402
    Installation metal fittings new motor and old control box: K14M72354001
    old motor and new control box:K14M72354101

  1. CONTROL BOX

    Model Output Power suppy Functions
    Single phase
    XC-GMFY-10-05 550W Single-phase 100 to 120V "Full functionality including auto thread trimming,presser foot litting,
    fixed-stitch stitcing,continuous stitching and backtaing.
    Equipped with step sequence,simple sequence and computer communication functions
    (when connected to control panel).Equipped with 8 solenoid drive outputs,
    2 electromagnetic valve outputs,1 small-signal output and 14 input
    terminals including a variable voltage input"
    XC-GMFY-20-05 550W Three/single-phase
    200 to 240V
  2. MOTOR

    model
    Power supply
    output
    Tapered shaft
    Phase
    Voltage
    XL-G554-10Y
    Single-phase
    100 to 120V
    550W
    Tapered shaft
    XL-G554-20Y Three/single-phase
    200 to 240V
    550W
    Tapered shaft

    Note:Please refer to the instruction manual for details of the connection method.
  3. SUPPORT FOR EACH MACHINE
    COMPATIBILITY SETTINGS TABLE FOR ADAPTED MACHINES

    Adapted Machines
    XC-GMFY
    Function/Model
    Lock sittching
    
    Overlock
    ›
    Chain stitching
    ›
    Cross stitching
    ›
    Whipstitching
    ›

    ›NEEDLE POSITIONER FUNCTION: THREAD TRIM FUNCTION.

  1. DIMENSIONS

  2. SPECIFICATIONS

    POWER SUPPLY 100V to 120V 200V to 240V
    MOTOR MODEL XL-554-10Y XL-554-20Y
    CONTROL BOX MODEL XC-GMFY-10-05 XC-GMFY-20-05
    RATED OUTPUT 550W
    RATED SPEED 3,600RPM
    RATED TORQUE 1.47NEM(0.15kgEM)
    SPEED CONTROL RANGE 70RPM TO 8,999RPM
    MACHINE AXIS SHIPPING SETTING(250RPM TO 4,000RPM)
    MOTOR AXIS 50RPM TO 3,600RPM
    DETECTOR XC-KE-01P
    ENVIRONMENT AMBIENT TEMPERATURE 5Ž to 40Ž
    AMBIENT HUMIDITY 30%RH TO 95%RH(NO CONDENSATION)
    MAX. ALTITUDE ABOVE SEA-LEVEL 1,000M
    WEIGHT MOTOR:6.9KG(NET),9.1(GROSS)
    CONTROL BOX:3.5KG(NET),6.9KG(GROSS)
    PACKAGING STYLE L:490MM X W:402MM X H:227MM"CARTON BOX"(WHEN MOTOR AND CONTROL BOX ARE PACKAGED AS SET)


HOMEb‰ïŽÐ—”Ob‰ïŽÐ‰ˆŠvb‰ïŽÐŠT—vbŽæˆµ»•ibLINKb‚¨–â‚¢‡‚킹bENGLISH

Copyright(C) 2006 ELIZE INC.All Rights Reserved.
@@@