工業用ミシンを含む縫製機器の輸出入専門商社 大阪市 エリゼ株式会社
ホーム 会社理念 会社沿革 会社概要 リンク お問い合わせ ENGLISH 中文

取扱製品一覧
MITSUBISHI BRAND

◆三菱ブランド

COMPOUND-FEED LOCKSTITCH WITH AN AUTOMATIC UNDER TRIMMER INDUSTRIAL SEWING MACHINES

MODEL LU2-4650-B1T
(SINGLE-NEEDLE)

INTRODUCING LONG ARM AND PRESSER FOOT COMPATIBLE WITH MITSUBISHI HIGH-SPEED COMPOUND FEED MACHINE!




  1. BY ADOPTING A LONG ARM, THE FABRIC TO BE SEWN CAN BE HANDLE EASILY. AS THE PRESSER FOOT IS COMPATIBLE WITH THE MITSUBISHI COMPOUND FEED MACHINE (LU2-4410), PRESSER FOOT AVAILABLE ON HAND CAN BE EFFECTIVELY USED. AN AUTOMATIC PRESSER LIFTER IS STANDARD-EQUIPPED.
  2. FEED REGULATING DIAL WITH LOCK

    A VARIETY OF SEWING PATTERN CAN BE SELECTED.
  3. CONTROL SWITCH PANEL (OPTION)

    A VARIETY OF SEWING PATTERN CAN BE SELECTED.
  4. BUILT-IN AUTOMATIC PRESSER FOOT LIFTER

    SETUP IS NOW EASIER.
  5. POWERFUL & HIGH PERFORMANCE LIMISERVO X-SERIES.

    * SIMPLE SEQUENCE FUNCTION IS PROVIDED.
    * INSERTION AND REMOVAL OF FABRICS ARE EASY WITH THE REVERSE NEEDLE LIFTING FUNCTION.
    * NEEDLE DROPPING POSITION CAN BE ACCURATELY DECIDED WITH THE STOP JUST BEFORE FABRIC FUNCTION.
  6. VARIABLE SPEED LEVER

    THE LEVER HAS BEEN CHANGED TO A TYPE INSTALLED ON THE CONTROL BOX SIDE.
    * SEPARATION FROM THE PANEL IS EASY.
    * A STANDING WORK TYPE MACHINE PEDAL CAN BE INSTALLED EASILY.
  7. T-SHAPE TABLE LEGS FOR EITHER STANDING WORK OR SITTING WORK

    A STANDING-WORK FUNCTION HAS BEEN MOUNTED ON THE CONTROL BOX.
  8. RELIABLE AND POPULAR ALL-DIGITAL SERVO

    * A REAL-MAINTENANCE FREE STRUCTURE WITH NO WEAR SECTIONS.
    * EXTENSIVE ENERGY SAVING, LOW NOISE AND NOISE RESISTANT STRUCTURE.





  1. HIGH SEWING SPEED OF 3,000 spm IS REALIZED WITH LARGE HOOK

    BY IMPROVING THE NEEDLE BAR MECHANISM, THE TAKE-UP MECHANISM AND UPPER UP/DOWN FEED MECHANISM, A HIGH SPEED OF 3,000 spm CAN BE REALIZED EVEN WITH THE LARGE-HOOK
    DIAL TYPE ALTERNATING STROKE ADJUSTMENT

    THE ALTERNATING STROKE AMOUNT BETWEEN THE OUTER PRESSER FOOT AND INNER PRESSER FOOT CAN BE ADJUSTED EASILY JUST BY OPERATING THE DIAL ON THE TOP OF THE TOP COVER.
    ONE TOUCH INSTANT ALTERNATING OF STOKE AMOUNT

    THE ALTERNATING STROKE AMOUNT CAN BE INCREASED WITH SINGLE TOUCH DURING STITCHING, SO STEPPED SECTIONS CAN BE STITCHED EASILY. THIS CAN ALSO BE OPERATED WITH THE KNEE SWITCH (OPTION).
    AUTOMATIC NEEDLE-REVERSING FUNCTION (WHEN THE LIMIVERVO X IS USED)

    A NEEDLE HEIGHT OF 16MM AND OVER CAN BE MAINTAINED WHEN THE NEEDLE IS IN THE UPPER STOP POSITION SO THAT HA HEAVY MATERIAL CAN BE INSERTED AND REMOVED EASILY. 
    BUILT-IN TYPE DETECTOR FOR HIGHLY ACCURATE POSITION DETECTION (LARGE PULLEY)

    THE NEEDLE STOP UP POSITION AND DOWN POSITION CAN BE ADJUSTED INDEPENDENTLY WITH A SINGLE TOUCH. THE POWER STATE CAN ALSO BE CONFIRMED AT A GLANCE WITH THE DISPLAY LAMP.
    OPE4RATIONS ARE MADE EVEN EASIER WITH THE INCORPORATION OF LARGE PULLEY.
    STABLE TRIMMER PERFORMANCE FOR FROM THIN TO THICK THREADS

    THE MOVABLE KNIFE MOVING STRAIGHT IN PARALLEL WITH THE FEED DOG IS ENGAGED WITH THE FIXED BLADE TO PROVIDE A SHARP TRIMMER ACTION FOR FROM THIN TO THICK THREADS (#6).



  1. STANDARD MOUNTING OF A PC INTERFACE FUNCTION

    * SETTING CAN BE SAVED AND COPIED INTO A PC. OPTIONS : PC SETUP SOFTWARE (INTEL 80486DX AND ABOVE, WINDOWS 3.1 AND ABOVE, MEMORY : 16MB OR MORE, OPEN HARD DISK CAPACITY : 10MB OR MORE) note 1*
    * PRODUCTION CONTROL SYSTEM CAN BE CONSTRUCTED note 2*
    PRODUCTION DATA CAN BE SUPPLIED TO A SYSTEM SUCH AS A PC.
    note 1 WINDOWS IS A REGISTERED TRADEMARK OF MICROSOFT CORPORATION. ALL BRAND NAMES USED IN THIS CATALOG ARE REGISTERED TRADEMARKS OR TRADEMARKS OF THEIR RESPECTIVE HOLDERS. THIS SOFTWARE MAY NOT RUN PROPERLY DEPENDING ON THE C IN USE.
    note 2 PREPARE A SYSTEM SUCH AS A PC AND PRODUCTION MANAGEMENT SOFTWARE.


  1. XC-CVS-2 TYPE VARIABLE SPEED PEDAL

    VARIABLE SPEED OPERATION IS POSSIBLE DURING STANDING WORK.
    EXTERNAL SIGNALS FOR THREAD TRIMMING AND PRESSER FOOT LIFTING, ETC., CAN BE OPERATED WITH THREE FOOT SWITCHES.
  2. XC-E500Y TYPE CONTROL SWITCH PANEL

    THE EASY-TO USE CONTROL PANEL IS NOW EVEN MORE USER-FRIENDLY.

    SETTINGS CAN BE EASILY SAVED AND COPIED TO OTHER CONTROL BOXES.

    THE CONTROL BOX UNDER THE SEWING MACHINE TABLE CAN BE SET WITH THE CONTROL PANEL.

    FUNCTIONS TO MEMORIZE AND COPY THE CONTROL BOX SETTING DATE HAVE BEEN ADDED.

      XC-E500Y
    NO. OF NUMBER DISPLAYS 5
    LINEAR STITCHING
    TACKING 6 TYPES
    PRESSER STITCHING ○(1 TO 1999 STITCHES)
    CONTINUOUS PRESET STITCHING MAX. 8 PATTERNS WITH PROGRAM
    MAX. 25 PROCESSES
    TACKING 6 TYPES
    UP/DOWN COUNTER UP COUNTER : 1 TYPE (4 DIGITS)
    DOWN COUNTER : 1 TYPE (4 DIGITS)
    THREAD TRIMMING (RELEASE) KEY
    AUTOMATIC KEY
    SLOW START KEY
    CONTROL PANEL SETTING DATE COPY FUNCTION READING AND WRITING OF SET DATE IS POSSIBLE.
    PROGRAM KEY AND LED FREELY SET INPUT SWITCH : 1 TYPE FREELY SET OUTPUT LED : 1 TYPE


  1. MODEL LU2-4650-B1T
    NUMBER OF NEEDLE SINGLE-NEEDLE
    APPLICATION HEAVY MATERIAL
    MAX. SEWING SPEED (SPM) RECIPROCAL ST. (MM) STITCH LENGTH (MM)
    3000 2 0-6
    2700 3 0-6
    2000 5-6 6-9
    STITCH LENGTH (MM) 0-9
    PRESSER FOOT STROKE (MM) HAND 9
    KNEE LIFTER 16
    NEEDLE NO. DP X 17 #21
    NEEDLE-BAR STROKE (MM) 35
    THREAD TAKE-UP LEVER STROKE (MM) SLIDER TYPE 71
    ALTERNATING MOVEMENT (MM) 2-6
    STROKE ADJ. DIAL
    INSTANT ADJ. AIR CYLINDER
    UTOMATIC THREAD TRIMMER
    TOUCH BACK
    HOOK (HORIZONTAL FULL ROTATING) LARGE
    BOBBIN ALUMINUM TRIMMER TYPE
    LUBRICATION SYSTEM AUTOMATIC LUBRICATION
    STANDARD AIR PRESSURE 0.4MPa(4kgf/cm2)
    BED DIMENSIONS (MM) 517X178
    NEEDLE SIZE OF PRESSER FOOT STANDARD φ2.4MM(SPECIAL φ2.1MM)
    MASS (KG) 44 (SEWING MACHINE HEAD)




HOME会社理念会社沿革会社概要取扱製品LINKお問い合わせENGLISH

Copyright(C) 2006 ELIZE INC.All Rights Reserved.