HƗp~V܂ޖD@̗Ao古Ё@s@G[
z[ ЗO Љv ЊTv N ₢킹 ENGLISH

戵iꗗ
MITSUBISHI BRAND

OHuh

CORNER STITCHING DOUBLE-NEEDLE NEEDLE FEED LOCKSTITCH INDUSTRIAL SEWING MACHINE

MODEL LT2-2240/2250

MITSUBISHI LEADING-EDGE TECHNOLOGY HAS CREATED THE LT2-2250 (WITH AN AUTOMATIC UNDER-TRIMMER) AND THE LT2-2240 TO PROVIDE USER-FRIENDLY FUNCTION FOR A WIDE RANGE OF SWING TASKS.


  1. THESE NEW DOUBLE-NEEDLE LOCKSTITCH NEEDLE FEED SEWING MACHINES EASE OF USE FOR A WIDE VARIETY OF STITCHING NEEDS. IN ADDITION TO THEIR NEAT, STITCH FORMATION, THE NEW MODELS PROVIDE A NEW SHIN-FABRIC SEWING FEATURE, A MODIFIED SOFT OLIVE-WHITE BODIES. A GREAT VARIETY OF NEEDS ARE SATISFIED BY THE COMBINATIONS OF A LARGE NUMBER OF OPTIONS SUCH AS THE LIMI-SERVO F SERVO MOTOR.
  2. FEED REGULATING DIAL WITH LOCK

    TROUBLE CAUSED BY STITCH VARIATION DURING STITCHING CAN BE ACCURATELY PREVENTED.
  3. CONTROL SWITCH PANEL (OPTION)

    A VARIETY OF SEWING PATTERNS CAN BE SELECTED.
  4. AUTOMATIC PRESSER FOOT LIFTER (OPTION)
  5. CONTROL SWITCH PANEL (OPTION)

    A VARIETY OF SEWING PATTERNS CAN BE SELECTED.
  6. VARIABLE SPEED LEVER

    THE LEVER HAS BEEN CHANGED TO TYPE INSTALLED ON THE CONTROL BOX SIDE.
    * SEPARATION FROM THE PANEL IS EASY.
    * A STANDING WORK TYPE MACHINE PEDAL CAN BE INSTALLED EASILY.
  7. T-SHAPE TABLE LEGS FOR EITHER STANDING WORK OR SITTING WORK

    A STANDING-WORK FUNCTION HAS BEEN MOUNTED ON THE CONTROL BOX.
  8. RELIABLE AND POPULAR ALL-DIGITAL SERVO

    * A REAL-MAINTENANCE FREE STRUCTURE WITH NO WEAR SECTIONS.
    * EXTENSIVE ENERGY SAVING, LOW NOISE AND NOISE RESISTANT STRUCTURE.

     
  1. STANDARD MOUNTING OF A PC INTERFACE FUNCTION
    * SETTING CAN BE SAVED AND COPIED INTO A PC. OPTIONS : PC SETUP SOFTWARE (INTEL 80486DX AND ABOVE, WINDOWS 3.1 AND ABOVE, MEMORY : 16MB OR MORE, OPEN HARD DISK CAPACITY : 10MB OR MORE) note 1*
    * PRODUCTION CONTROL SYSTEM CAN BE CONSTRUCTED note 2*
    PRODUCTION DATA CAN BE SUPPLIED TO A SYSTEM SUCH AS A PC.

    note 1 WINDOWS IS A REGISTERED TRADEMARK OF MICROSOFT CORPORATION. ALL BRAND NAMES USED IN THIS CATALOG ARE REGISTERED TRADEMARKS OR TRADEMARKS OF THEIR RESPECTIVE HOLDERS. THIS SOFTWARE MAY NOT RUN PROPERLY DEPENDING ON THE C IN USE. note 2 PREPARE A SYSTEM SUCH AS A PC AND PRODUCTION MANAGEMENT SOFTWARE.

 
  1. NEW BOBBIN-THREAD HOLDING MECHANISM ALLOWING ADJUSTMENT OF BOBBIN-THREAD GRABBING PRESSURE

    THE BOBBIN-THREAD HOLDING MECHANISM FOR TRIMMER ALLOWS THE ADJUSTMENT OF BOBBIN-THREAD GRABBING PRESSURE ACCORDING TO THE THREAD USED.
    STABLE TRIMMER PERFORMANCE FOR FROM THIN TO THICK THREAD

    THE MOVABLE CUTTER BLADE MOVING STRAIGHT IN PARALLEL WITH FEED DOG IS ENGAGED WITH THE STATIONARY BLADE TO PROVIDE SHARP TRIMMER ACTION FOR FROM THIN TO THICK THREADS (#8).
    LEFT-RIGHT INDEPENDENTLY ADJUSTABLE TYPE TAKE-UP SPRING

    THE THREAD STATE CAN BE ADJUSTED SEPARATELY FOR THE LEFT THREAD AND RIGHT THREAD. ADJUSTMENT CAN BE MADE VERY EASILY, AND STEPPED STITCHING SUCH AS STITCHING OF COLLARS IS FINISHED BEAUTIFULLY.
    WIPER WITH UPGRADED PERFORMANCE

    THE WIPER HAS ABOUT 60% HIGHER PERFORMANCE (AS COMPARED TO OUR PREVIOUS MODEL) TO ENSURE AN EXTREMELY STABILIZED WIPER ACTION FOR EVEN THICK THREAD.
    BUILT-IN TYPE DETECTOR FOR HIGHLY ACCURATE POSITION DETECTION

    THE NEEDLE STOP UP POSITION AND DOWN POSITION CAN BE ADJUSTED INDEPENDENTLY WITH A SINGLE TOUCH. THE POWER STATE CAN ALSO BE CONFIRMED AT A GLANCE WITH THE DISPLAY LAMP.
    AUTOMATIC LUBRICATING SYSTEM FOR EASE OF MAINTENANCE

    THE AUTOMATIC LUBRICATING SYSTEM ELIMINATES OILING. IT FORCES THE PUMP TO SUPPLY OIL FROM THE OIL TANK THE REQUIRED PARTS TO FURTHER IMPROVE THE DURABILITY OF THE SEWING MACHINE.



 
  1. VARIOUS DEVICES TO SUPPORT LABOR SAVING DURING SEWING. (OPTION)


  2. AUTOMATIC PRESSER FOOT LIFTER
    TYPE
    LE-FM-1 LE-FM-2 LE-FA
    SYSTEM ELECTROMAGNETIC PNEUMATIC
    PRESSER FOOT LIFTING TORQUE (KG-CM) APPROX.50 APPROX.65 MAX. 140 (5KG/CM2)
    CONDITIONS 40%ED CONTINUOUS CONTINUOUS
    APPLICATION LIGHT TO MEDIUM HEAVY MATERIALS HEAVY MATERIALS HEAVY, SPECIAL MATERIALS

  3. XC-CVS-2 TYPE VARIABLE SPEED PEDAL

    ALLOWS VARIABLE-SPEED OPERATION FOR STANDING WORK.
    CAN BE SECURED OF THE TABLE LEG CROSSPIECE.
    USING TWO FOOT SWITCHES, OPERATIONS SUCH AS THE TRIMMER AND PRESSER FOOT LIFTING CAN BE PERFORMED WITH EXTERNAL SIGNALS.
  4. THE EASY-TO USE CONTROL PANEL IS NOW EVEN MORE USER-FRIENDLY.

    SETTINGS CAN BE EASILY SAVED AND COPIED TO OTHER CONTROL BOXES.

    THE CONTROL BOX UNDER THE SEWING MACHINE TABLE CAN BE SET WITH THE CONTROL PANEL.

    FUNCTIONS TO MEMORIZE AND COPY THE CONTROL BOX SETTING DATE HAVE BEEN ADDED.

      XC-E500Y
    NO. OF NUMBER DISPLAYS 5
    LINEAR STITCHING
    TACKING 6 TYPES
    PRESSER STITCHING (1 TO 1999 STITCHES)
    CONTINUOUS PRESET STITCHING MAX. 8 PATTERNS WITH PROGRAM
    MAX. 25 PROCESSES
    TACKING 6 TYPES
    UP/DOWN COUNTER UP COUNTER : 1 TYPE (4 DIGITS)
    DOWN COUNTER : 1 TYPE (4 DIGITS)
    THREAD TRIMMING (RELEASE) KEY
    AUTOMATIC KEY
    SLOW START KEY
    CONTROL PANEL SETTING DATE COPY FUNCTION READING AND WRITING OF SET DATE IS POSSIBLE.
    PROGRAM KEY AND LED FREELY SET INPUT SWITCH : 1 TYPE FREELY SET OUTPUT LED : 1 TYPE

 
  1.   CORNER STITCHING DOUBLE-NEEDLE NEEDLE-FEED LOCKSTITCH, AUTOMATIC UNDER-TRIMMER CORNER STITCHING DOUBLE-NEEDLE NEEDLE-FEED LOCKSTITCH
    MODEL LT2-2250-M1TW LT2-2250-A1T LT2-2250-B1T LT2-2240-MOB LT2-2240-BOB
    APPLICATION FOR THIN TO MEDIUM-THICK MATERIAL FOR MEDIUM-THICK MATERIAL FOR MEDIUM-THICK TO HEAVY MATERIAL FOR THIN TO MEDIUM-THICK MATERIAL FOR MEDIUM-THICK TO HEAVY MATERIAL
    NEEDLE DPX5 #14 DPX5 #16 DPX5 #18 DPX5 #14 DPX5 #18
    STITCH LENGTH (MM) 5 5 7 5 7
    PRESSER FOOT STROKE (MM) HAND 7 7 7 7 7
    KNEE 9 13 13 13 13
    MAX. SPEED (s.p.m) 3500 3000 3000 3500 3000
    NEEDLE BAR STROKE (MM) 33.4 33.4 33.4 33.4 33.4
    AUTOMATIC THREAD TRIMMER | |
    TOUCHBACK | |
    WIPER SYSTEM OPTION OPTION | |
    HOOK (HORIZONTAL FULL ROTATION) STANDARD LARGE LARGE STANDARD LARGE
    BOBBIN ALUMINUM TRIMMER TYPE STEEL TYPE
    LUBRICATION SYSTEM AUTOMATIC LUBRICATION
    BED DIMENSIONS (MM) 515 X 178
    *FEED DOG (PITCH X NEEDLE HOLE) (MM) STANDARD 1.7X1.8 MEDIUM-THICK 1.8X2.8 HEAVY 1.7X2.2X3.2 STANDARD 1.7X1.9 HEAVY 1.7X2.5
    WEIGHT (KG) 41 (SEWING MACHINE HEAD)

    *Feed dog for thin material is also available as option in 1.15mm pitch and 1.6mm needle hole

 



HOMEbЗObЉvbЊTvb戵ibLINKb₢킹bENGLISH

Copyright(C) 2006 ELIZE INC.All Rights Reserved.
@@@